Design Your Own Vanity Countertop

Get exactly what you need for you bathroom!  Simply customize each of the options below to build your top.  Use the information icons to learn more about each step, view images and order samples.

DESIGN SUMMARY

Please send me a coupon for remnant stones.

LAB-ED-EAS
Eased Edge
3
http://nestappeal.com/

Your width of # can easily accommodate:

Your depth of # can easily accommodate:

Polished4" Backsplash
"
4" BacksplashPolished
16"
16"
4" BacksplashPolished
"

Polished
FRONT
  • {{section.name}}

What dimensions do you need?


We recommend 1" of overhang for each exposed edge.

 

Most stone colors are available up to 98", max width 120" limited stone selection.

 

Minimum width for 2 undermount sinks is 46".

Minimum for one undermount sink is 23".  Vessel sinks can work for smaller widths.

Width
i

(inches)

23" to 120"

(.25" increments)

22" depth fits a standard bathroom cabinet: 21" + 1" overhang.

 

21" is the minimum depth for an undermount sink.  Vessel sinks can work for less than 21" depth.

Depth
i

(inches)

15" to 26"

(.25" increments)

3cm provides larger selection and costs a bit more.

Thickness
i

2cm
3cm

Choose how you would like to finish the edges of your vanity countertop.


The front edge will come polished with the edge type you choose.  

 

Any side that goes against a wall should remain unpolished.

 

Any side that is exposed, should be polished.

 

All 4 sides can be polished for use as a table or desk.

Polished Edges
i

BACK
LEFT
RIGHT

FRONT (always polished)

Eased is included at no additional charge.

 

Demi Bullnose, Beveled and Ogee edge types are available at $1 per linear inch.

 

Chiseled Edging can be added for an additional $4 per linear inch.

Edge Type
i

Backsplash is 4” tall and comes with a polished square/eased edge. It will match the color and thickness of the slab. It sits on top of the counter. Use a silicone adhesive to secure it to the wall.

Backsplash
i

BACK
LEFT
RIGHT



Sink #1
distance from left edge
(inches)

16" will center this sink on left half
Sink #2
distance from left edge
(inches)

50" will center this sink on right half
Sink #1
distance from left edge
(inches)

16" will center this sink

distance from back edge
(inches)

must be at least 7" from any edge

hole diameter
(inches)

Hole is 1.75" for standard drain. Increasing hole diameter up to 10" to submerge your vessel sink is an option for an added fee.

Sink #2
distance from left edge
(inches)

50" will center this sink on right half

distance from back edge
(inches)

must be at least 7" from any edge

hole diameter
(inches)

Hole is 1.75" for standard drain. Increasing hole diameter up to 10" to submerge your vessel sink is an option for an added fee.



For vessel sinks, choose the location of faucet hole. 1 3/8” holes are standard and will fit all faucets


Hole Placement
1 hole
3 holes 4" spread
3 holes 8" spread

Vessel Sink #1
i
45° left
center
45° right
none

Distance
from center of sink hole to center of faucet hole
Vessel Sink #2
i
45° left
center
45° right
none

Distance
from center of sink hole to center of faucet hole


NEXT
BACK
Live Chat Software